Description
Stop wrestling with a pile of loose pedals and a spider’s web of cables. The BOSS BCB-60 gives you a molded resin case that opens into a ready-to-wire pedalboard, so your rig goes from gig bag to stage-ready in minutes.
- Tough molded resin shell shrugs off the bumps and drops of van loads and load-ins
- Padded interior ships with three pre-cut foam inserts sized for BOSS compact and Twin Pedals, plus a spare insert you can trim to fit gear from any brand
- Room to build out a board using standard compacts, Twin Pedals, a tuner, or even a V-Wah
- Onboard 1,000mA AC adaptor (PSC-series) powers up to seven devices from one outlet — roughly the output of five separate PSA adaptors
Signal routing is handled through dedicated INPUT, SEND, RETURN A/B, OUTPUT A/B, PSC IN, and DC OUT jacks, so effects loops and multi-output setups are easy to wire without extra hardware. Since the case runs on DC 9V through the included PSC-series adaptor, you skip the tangle of individual wall warts entirely.
Everything needed to get patched in comes in the box: the AC adaptor, an 8-pin parallel DC cord, five short L-L patch cables, three long L-L patch cables, and the owner’s manual. At 670 x 370 x 100mm and 3.8kg (26-7/16″ x 14-5/8″ x 3-15/16″, 8 lbs. 7 oz.), it’s built for transport without adding unnecessary bulk to your load.
Whether you’re consolidating a growing pedal collection or building your first serious board, the BCB-60 handles the power and organization so you can focus on tone.
Reviews
There are no reviews yet.